Introduction - BenQ InstaShow VS10 User Manual

Introduction

Instashow VS10 is a wireless conferencing solution that supports BYOM in your
organization. You can use your own device to host a video conference. All you have to do
is few clicks on your VS Assist App. Your presenters can use the VS10 buttons to share
presentation with simple plug and play.
A standard product set consists of an InstaShow™ VS10 Host (or "Host" in this document)
and two InstaShow™ VS10 Buttons (or "Buttons" in this document). Depending on the
location where you buy the product, the software of the base unit can be different. You can
buy additional InstaShow™ VS10 Button kits if needed.
• "InstaShow™" will hereinafter be referred to as "the product" in this document.
• "InstaShow™ Host" will hereinafter be referred to as "Host" in this document.
• "InstaShow™ Button/Buttons" will hereinafter be referred to as "Button"/"Buttons" in this document.
Your product complies with the local wireless regulations and the warranties are valid in the country/
region where the product is purchased. Using the product outside the purchased country/region does
not guarantee the wireless functionalities. And modification of any part of the product will void the
warranties.
The InstaShow™ is considered networked equipment with high network availability (HiNA
equipment with HiNA functionality) as it provides wireless network access for wireless
InstaShow™ Buttons. The detailed operations of standby please refer to
standby mode on page 33 for more information.
6
Enabling network