Table of Contents
Advertisement
• Video Conference Standby - This setting when enabled allows you to automatically
hide the InstaShow window from videoconferencing interface anytime InstaShow is
not presenting thus allowing the videoconferencing application to save screen space
when InstaShow is not directly in use. The InstaShow window will still appear within
the videoconferencing interface on command anytime the Button is pushed and a
presentation via the Host begins.
Press Apply to save any change to the Advance Setting fields.
Button (TX) USB Setting
The Button (TX) USB Setting sub-menu allows you to enable/disable the following
capabilities for connected Buttons by checking/unchecking the box next to the respective
function.
• InstaShow Button Microphone (UAC)
• Touch Back (HID)
• Auto Connection (Storage)
• The items Button (TX) USB Setting sub-menu can only be applied on VS10 Buttons and are not
applicable to VS20 Buttons.
• Each function can be enabled/disabled independent of one another.
• The InstaShow Button Microphone (UAC) function is not supported on VS10 Buttons, even if its box
is checked.
Press Apply to save any change to the Button (TX) USB Setting fields.
Firewall
The Firewall sub-menu includes the following settings for the Host's firewall:
• Firewall - This setting allows you to enable the Host's built-in firewall.
• Enable DoS Protection - This settings allows you to enable the Host's built-in Denial of
Service (DoS) protections. DoS attacks are attacks that intend to deny users from using
a network by flooding the network with artificial traffic that slows down the network to a
degree to which it is unusable.
• Block WAM ICMP Request - This setting allows you to block Internet Control Message
Protocol (ICMP) requests, which is a type of network communication that is commonly
used in DoS-type of attacks.
Press Apply to save any change to the Firewall fields.
Network Service
The Network Service sub-menu allows you to enable Http over SSL which adds SSL
security to the connection between the device accessing the web management menu and
the Host. When enabled the URL used to access the menu requires an "HTTPS://" prefix.
Restart
Click the Restart button to restart the Host.
71
Advertisement
Table of Contents
