Attaching The Host To A Ceiling Mount; Placing The Host On A Table - BenQ InstaShow VS10 User Manual

Attaching the Host to a ceiling mount

If the display is mounted on the ceiling:
1. Attach the Host to the ceiling mount using the provided velcro strap.
2. Fix the Host to the mounting holder.
3. Use the supplied velcro to fix the mounting holder and the Host to the ceiling mount as
shown in the illustration.
• Please only use the velcro strap (300(L)mm*25(W)mm) provided with the kit to mount the Host to a
ceiling mount.
• Please see Positioning the Host antennas on page 19
maximize signal reception.

Placing the Host on a table

If your display is placed on a table, first attach the lid to the Host by following the process
described below:
1. Orient the lid over the bottom of Host so that the OPEN and LOCK print on the lid is
aligned with the triangle mark on the Host, then insert the lid into the lid compartment.
for guidelines on positioning the antenna to
16