Table of Contents
Advertisement
Starting and stopping presentations
This section will guide you on how to start and stop a presentation using the product.
Getting ready
Make sure that all the connected devices have been powered on and ready for the
presentation.
As the product could work with different projectors, IFPs, TVs, or monitors with standard
HDMI ports, the steps required to start a presentation may vary according to the actual
environment and your display specifications. Follow the procedures below and refer to the
specified sections for details.
1. To start a presentation, see
2. To stop a presentation, see
3. To start a split-screen presentation, see
details.
4. To start a presentation with a mobile device, see
5. To control presentations via a touchscreen displays or mouse/keyboard see
on page 38
for details.
Starting presentation
1. Make sure power is supplied to the Host. See
page 21
for more information.
2. Choose the HDMI source corresponding to the Host on the display. You will see the
Guide screen.
3. Please follow the instruction on the Guide screen to supply power to the Button. You
can also see
Setting up and powering a Button on page 25
LED indicator on the Button is static green when the Button is connected and working
properly.
4. To start a presentation, press the Present key.
Starting presentation on page 34
Idle presentation on page 35
Split screen presentations on page 36
Connecting the HDMI cable and power on
34
for details.
for details.
Touch back on page 38
for more information. The
for
for details.
Touch back
Guide
Screen
Advertisement
Table of Contents
