BenQ InstaShow VS10 User Manual page 75

To check if firmware upgrades are available for the Host and/or Button click the
New Firmware Check button in the respective sub-menu for the device.
• To have the Host or Button periodically check for firmware upgrades check the Periodical Check box
in the respective sub-menu for the device.
• Periodic checks for upgrades can only occur when the Host is connected via the WAN port to a
router with access to the Internet.
Host(RX) Firmware Upgrade
If a new firmware upgrade is available the new firmware version will be listed in the
New Host Firmware Version on OTA Server field.
To perform an OTA upgrade of the Host's firmware:
1. Select From OTA Server in the Firmware File field.
2. Click the Firmware Upgrade button in the Upgrade InstaShow Host field.
To perform an OTA upgrade ensure that the Host is connected to a router with access to the Internet.
When performing any type of upgrade, DO NOT do any of the following:
• Power off or press the reset button on the Host or Button.
• Close the browser window of the web management interface.
Failure to follow these warnings will result in firmware upgrade failure and subsequent product failure.
75