Table of Contents
Advertisement
To perform a direct upgrade from an upgrade file located on your local computer follow the
steps below:
Before executing a direct firmware upgrade, please contact your BenQ regional office for access to the
upgrade files.
1. Select From a Local File and then click the Select File button in the Firmware File field.
2. Navigate to and select the firmware upgrade file.
3. Click the Firmware Upgrade button in the Upgrade InstaShow Host field.
When performing any type of upgrade DO NOT do any of the following:
• Power off or press the reset button on the Host or Button.
• Close the browser window of the web management interface.
Failure to follow these warnings will result in firmware upgrade failure and subsequent product failure.
76
Advertisement
Table of Contents
