Table of Contents
Advertisement
Enabling network standby mode
You can set the Host to enter network standby mode after a period of inactivity. To set
the time of inactivity, go to Web Management > Advance Setting > Network Standby. See
Advance Setting on page 70
To enable network standby mode, do one of the following:
- wait for the Host to enter network standby mode automatically if no wireless devices
(e.g., a Button, a mobile device, or a laptop) being connected to the Host's SSID and
no data (from any USB devices such as a mouse, a keyboard, or from touch back
function) being transmitted to the Host within the set time.
- if there is no wireless devices being connected to the Host's SSID within the set time,
press the standby button on the Host to enable network standby mode immediately.
The LED indicator on the Host lights up static white when it is in network standby mode.
The network standby mode is disabled when
- a wireless device is connected to the Host's SSID; or
- data (from any USB devices such as a mouse, a keyboard, or from touch back function)
is transmitted to the Host; or
- you press the standby button on the Host.
for more information.
33
Advertisement
Table of Contents
