Table of Contents
Advertisement
Button(TX) Firmware Upgrade
To upgrade the Button's firmware using an upgrade file located on your local computer
follow the steps below:
1. Connect the Button you want to upgrade to the laptop running the web management
interface and then wait for the Button's LED indicator to light up green.
2. Select From a Local File in the Firmware File field and then click the Select File button.
3. Navigate to and select the firmware upgrade file.
4. Select the Button you want to upgrade and then click the Firmware Upgrade button in the
Upgrade Selected InstaShow Button field.
When performing any type of upgrade DO NOT do any of the following:
• Power off or press the reset button on the Host or Button.
• Close the browser window of the web management interface.
Failure to follow these warnings will result in firmware upgrade failure and subsequent product failure.
To upgrade the Button's firmware directly from your Host via the connection between the
Button and Host.
77
Advertisement
Table of Contents
