BenQ InstaShow VS10 User Manual page 59

slower data speeds and is more commonly used by older mobile devices.
• 5G Enable - This option cannot be disabled as all the connections between the Host and
Buttons rely on 5G Wi-Fi.
• Certain mobile devices are unable to access 5G Wi-Fi signals due to hardware limitations. If your
mobile device is unable to connect to the Host via Wi-Fi, select Enable in the 2.4G Enable field.
• Both 2.4G Enable and 5G Enable can be enabled at the same time.
• Device Isolate - This option when enabled allows you to block communication between
the devices. connected to the Host's network, including Buttons, PCs, and mobile devices
as a security precaution.
• ATF (Air Time Fairness) - This option allows you to enable or disable ATF which allows
faster clients to have more airtime than slower clients in order to boost the overall
network performance. However, this may make slower clients even slower.
• Band Steering - This option allows you to enable or disable Band Steering which is
a feature that balances dual-band capable wireless clients to connect to the faster
5GHz Wi-Fi, and leave the 2.4GHz Wi-Fi less-crowded for those clients who support
2.4GHz only in order to improve the Wi-Fi performance for all the clients. When using
Band Steering you will only have one SSID ("VS10_XXXXXX") with one password to
connect to.
Press Apply to save any change to the Setting fields.
Enabling WPA2 Enterprise Security Encryption for a Second SSID
1. Enter the Wireless Network menu of the Web Management interface.
59