Led Indicators Of The Button And The Host - BenQ WDC20C User Manual

9
Alignment hole

LED indicators of the Button and the Host

Please refer to the tables below for detailed indicator and status descriptions for the Button and the
Host.
LED indicator on the
Static blue
Flashing blue
Flashing green
Static green
Flashing red
Off
Quick flashing green
Static white
LED indicator on the
Static blue
Flashing blue
Flashing green
Static white
Static green
Off
10 Introduction
9.
Button
The device is presenting.
The device is in the process of pairing
• The device is starting up and connecting to
the host.
• The device is downloading the firmware.
The device is connected and working
normally.
The device is unable to connect to a host.
The device is powered off.
The device is upgrading the firmware.
The device is in network standby mode.
Host
Connected device is presenting.
The device is in the process of pairing.
• The device is starting up.
• The device is upgrading the firmware.
The device is in network standby mode.
The device is on and ready for connection.
The device is powered off.
Lid of InstaShow Host
Refer to Attaching the Host to the ceiling on page
12 for more information.
Status Description
Status Description