Assembling The Host; Setting Up The Host; Attaching The Host To The Ceiling - BenQ InstaShow VS10 User Manual

Assembling the Host

Assemble the Host with two antennas by turning the antennas clockwise to fasten them
tightly.

Setting up the Host

You are provided with four different ways to position the Host. The total weight of the Host
Unit varies by model. See the specifications for the weight of your product.

Attaching the Host to the ceiling

1. Place the lid on the ceiling so that the alignment icon on the lid is oriented to where you
want the front of the Host to point after installation.
2. Use the screw anchors and screws provided to lock the lid to the ceiling.
3. Lock the first hole (1).
4. Follow the instruction in the illustration below to lock the other holes (2-4).
5. Align the lock mark on the Host to the lock mark on lid and then mount the Host onto the
lid.
6. Rotate the Host counterclockwise to affix the Host to the lid.
Lock mark
Lock mark
• Please only use the screws (M3*16 tapping screw) and screw anchors provided with the kit to mount
the Host to the ceiling.
• Please see Positioning the Host antennas on page 19
maximize signal reception.
Alignment icon
2
4
3
1
for guidelines on positioning the antenna to
15