Table of Contents
Advertisement
1. Connect the Button you want to upgrade to the laptop running the web management
interface and then wait for the Button to link up with the Host and the LED indicator to
light up green.
2. Select From OTA Server in the Firmware File field.
3. Select the Button you want to upgrade and then click the Firmware Upgrade button in the
Upgrade Selected InstaShow Button field.
To perform an OTA upgrade ensure that the Host is connected via the WAN port to a router with
access to the Internet and the Button is paired and connected to the Host.
When performing any type of upgrade DO NOT do any of the following:
• Power off or press the reset button on the Host or Button.
• Close the browser window of the web management interface.
Failure to follow these warnings will result in firmware upgrade failure and subsequent product failure.
79
Advertisement
Table of Contents
