Pairing A Button And Host; When The Host Is Placed On A Table - BenQ InstaShow VS10 User Manual

Pairing a Button and Host

A product set includes a Host and two Buttons, which are paired before shipment. In such
a case, you don't need to pair them again. However, if you buy two or more product sets,
and you want to pair a Button with a different Host, you need to follow the instruction
below. If you buy an additional Button kit, and you want to pair the new Buttons with your
Host, you need to follow the instruction below as well.

When the Host is placed on a table

1. Make sure your Host is ready with a power supply. Connect the Button to the
corresponding input of a laptop.
2. When the new Button is connected to the laptop, the LED indicator of the Button will
flash red.
If a Button nearby has been paired with a Host before, it will turn static green.
3. Press the PAIRING key of the Host for five seconds, the LED indicator of the Host will
blink blue for two minutes, waiting to pair with a Button.
USB-C
28