Cleaning The Parts After Disassembly; Assembly Of The Device - WAGNER Cobra 40-10 Translation Of The Original Operating Manual

Operating manual High-pressure double diaphragm pumps Cobra 40-10; Cobra 40-25
10 Repairs
– Torque wrench 40 Nm; 30 lbft
– Open-end wrenches, sizes 3; 5; 7; 8; 10; 12; 13; 14; 15; 16; 17; 18; 19; 22; 24; 27; 36; 50
– Allen wrench, size 10
– Screwdriver, size 3
10.4 CLEANING THE PARTS AFTER DISASSEMBLY
WARNING
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gases.
4 Examine the compatibility of the cleaning agents and working media on the basis of
the safety data sheets.
Please note:
1. Thoroughly clean all reusable parts with a suitable cleaning agent.
2. All dismantled parts have to be clean and dry after cleaning. Care should be taken that
these parts remain free of solvents, grease or sweat from the hands (salt water). Perform
cleaning and mounting tasks wearing gloves.
10.5 ASSEMBLY OF THE DEVICE
In Chapter Spare Parts [8 65] the order numbers for device spare parts can be found, as
well as for wearing parts such as seals.
1. Defective parts, O-rings and seal sets must always be replaced.
2. Use greases and glues in accordance with Chapter Spare Parts [8 65].
3. Observe torque specifications in Chapter Spare Parts [8 65].
Assembly Aids
Order no. Quantity
9992590 1 pc ≙ 50 ml
9992511 1 pc ≙ 50 ml
1 pc ≙ 150 ml
9992528
1 pc ≙ 50 ml
9992831
9998808 1 pc ≙ 18 kg!
9992616 1 pc ≙ 1 kg can
1 pc ≙ 250 ml
322912
Brand notice
The brands specified in this document are property of the respective owners. Loctite ® for
example, is a registered brand of Henkel.
Order number 2340851 | Edition 05/2022
Designation
Loctite® 222
Loctite® 243
Loctite® 270
Loctite® 542
Mobilux® EP 2 grease
Molykote® DX grease
Hydraulic oil - Wagner
Smaller tanks
400 g tube ≙ order no. 2355418
50 g tube ≙ order no. 2355419
57