Data; Materials Of The Parts Transporting Paint; Technical Data - WAGNER Cobra 40-10 Translation Of The Original Operating Manual

Operating manual High-pressure double diaphragm pumps Cobra 40-10; Cobra 40-25
5 Description
5.5 DATA
5.5.1 Materials of the Parts Transporting Paint
Paint-wetted part
Inlet housing
Fluid Section
Valves balls
Valve seats/valve cone
Diaphragms
Valve fitting
PA = polyamide
Positions of the individual parts: see Chapter Spare Parts [8 65].
5.5.2 Technical Data
Description
Pump ratio
Flow volume per double stroke (DH)
Maximum operating pressure
Maximum possible strokes in operation
Minimum/maximum air inlet pressure
Compressed air quality: free from oil and water
Ø air inlet (inside thread)
Minimum Ø of the compressed air supply line
Air consumption at 0.6 MPa; 6 bar; 87 psi per double stroke
Sound pressure level at maximum permissible air pressure*
Sound pressure level at 0.45 MPa; 4.5 bar; 65.27 psi air pressure*
Sound pressure level at 0.3 MPa; 3 bar; 43.5 psi air pressure*
Air motor piston diameter
Product input (outside thread)
Product output (inside thread)
Product output (outside thread)
22
Material
Consital (aluminum alloy)
Consital (aluminum alloy)
Stainless steel
Carbide
PA-resistant
1.4104
Units Cobra
40-10
cm³ / cc 10
cu inch 0.6
MPa
bar
psi 3626
DH/min
MPa 0.25 – 0.6
bar 2.5 – 6
psi 36.3 – 87
Quality standard 7.5.4 according to ISO
8573.1, 2010
7: Particle concentration 5–10 mg/m³
5: Humidity: pressure dew point ≤ 7 °C
4: Oil content ≤ 5 mg/m³
inch G 1/2"
mm 13
inch 0.51
NL 3.5
dB(A) 74
dB(A) 72
dB(A) 69
mm 80
inch 3.15
mm M36×2
inch G 3/8"
inch G 3/8"
Order number 2340851 | Edition 05/2022
Cobra
40-25
40:1
25
1.5
25
250
200
19
0.75
8.3
76
74
71
100
4