Tools; Cleaning The Parts After Disassembly; Assembly Of The Device; Replacing The Diaphragm (Due To Breakage) - WAGNER ZIP52 Finishing Operating Manual

Operating manual Pneumatic double diaphragm pump ZIP52 (PF Eco) Finishing
10 Repairs
10.3 TOOLS
The following tools are required for assembling and disassembling the device (if possible,
always bring entire tool sets with you):
– Torque wrench set
– Allen wrench set
10.4 CLEANING THE PARTS AFTER DISASSEMBLY
WARNING
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gases.
4 Examine the compatibility of the cleaning agents and working media on the basis of
the safety data sheets.
Please note:
1. Thoroughly clean all reusable parts with a suitable cleaning agent.
2. All dismantled parts have to be clean and dry after cleaning. Care should be taken that
these parts remain free of solvents, grease or sweat from the hands (salt water). Perform
cleaning and mounting tasks wearing gloves.
10.5 ASSEMBLY OF THE DEVICE
In Chapter Spare Parts [8 55] the order numbers for device spare parts can be found, as
well as for wearing parts such as seals.
1. Defective parts, O-rings and seal sets must always be replaced.
2. Use greases and glues in accordance with Chapter Spare Parts [8 55].
3. Observe torque specifications in Chapter Spare Parts [8 55].
Assembly Aids
Order no. Quantity
1 pc ≙ 50 ml
9992590
1 pc ≙ 50 ml
9992831
Z125.00 1 pc ≙ 1 kg
Brand notice
The brands specified in this document are property of the respective owners. Loctite, for
example, is a registered brand of Henkel.
10.6 REPLACING THE DIAPHRAGM (DUE TO BREAKAGE)
If the diaphragms are replaced as a result of breakage, all the internal parts of the motor
must be cleaned and the condition of the seals and reversing valve, which may have been
damaged by contact with the pump fluid, must be checked.
Mark the coupled parts (diaphragm covers, manifold, covers) with a felt-tip pen so as to
make subsequent reassembly easier.
Order number 2332848 | Edition 08/2020
Designation
Loctite® 222
Loctite® 542
Grease
49