Table of Contents
Advertisement
Operating manual Piston Pump EvoMotion 20-30
10 Repairs
10.3 TOOLS
The following tools are required for assembling and disassembling the device (if possible,
always bring entire tool sets with you):
– Torque wrench 4.5 Nm; 3.3 lbft / 20; 14.7 / 30; 22.1 / 35; 25.8
– Circlip pliers 30mm (inside)
– Set of slot-head screwdrivers
– Set of Phillips screwdrivers
– Set of Allen wrenches
– Set of wrenches
10.4 CLEANING THE PARTS AFTER DISASSEMBLY
WARNING
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gases.
4 Examine the compatibility of the cleaning agents and working media on the basis of
the safety data sheets.
Please note:
1. Thoroughly clean all reusable parts with a suitable cleaning agent.
2. All dismantled parts have to be clean and dry after cleaning. Care should be taken that
these parts remain free of solvents, grease or sweat from the hands (salt water). Perform
cleaning and mounting tasks wearing gloves.
10.5 ASSEMBLY OF THE DEVICE
In Chapter Spare Parts [8 53] the order numbers for device spare parts can be found, as
well as for wearing parts such as seals.
1. Defective parts, O-rings and seal sets must always be replaced.
2. Use greases and glues in accordance with Chapter Spare Parts [8 53].
3. Observe torque specifications in Chapter Spare Parts [8 53].
Assembly aids:
Order no.
Quantity
9992590
1 pc ≙ 50 ml
1 pc ≙ 50 ml
9992511
1 pc ≙ 50 ml
9992528
1 pc ≙ 50 ml
9992831
9998808
1 pc ≙ 18 Kg!
9992616
1 pc ≙ 1 kg can
1 pc ≙ 100 g
9992609
1 pc ≙ 70 g
9992816
Brand notice
The brands specified in this document are property of the respective owners. Loctite®, for
example, is a registered brand of Henkel.
Order number 2333553 | Edition 09/2020
Designation
Loctite® 222
Loctite® 243
Loctite® 270
Loctite® 542
Mobilux® EP 2 grease
Molykote® DX grease
Anti-seize paste
Miranit contact adhesive
Smaller tanks
400 g tube ≙ order no. 2355418
50 g tube ≙ order no. 2355419
47
Advertisement
Table of Contents
