Genicom LA36N Installation Manual page 32

Maintenance
The installation of the ribbon cartridge is detailed in the section, "Installing the Ribbon
Cartridge," in step 3 of the Installation Guide. This section describes only the removal of
the old ribbon cartridge.
To remove the ribbon cartridge:
1. Turn off the printer.
2. Open the front cover. For easy removal, slide the print head carriage between the second
and the third bail rollers (from left to right).
Warning: The print head may be hot if you have been printing recently.
3. Move the paper thickness lever 1 located on the top right of the printer to position D.
2-4