Genicom LA36N Installation Manual page 26

Installing the Windows Printer Driver
Installing the Printer Driver for Windows 3.x
The installation under Windows 3.x is performed by running the installation utility from
the Program Manager. The language selection is possible once the installation has been
launched.
For more details about the installation, see the readme.txt file on the CD ROM disk.
Installing the Printer Driver for Windows 95/98
The installation under Windows 95/98 is performed by either of two methods: use the Plug
and Play detection capability of Windows 95/98 or an installation from the Printers folder.
The language selection is made by selecting the corresponding directory.
For more details about the installation, see the readme.txt file on the CD-ROM disk.
Installing the Printer Driver for NT 4.0
The installation under NT 4.0 is performed from the Printers folder. The language selection
is made by selecting the corresponding directory.
For more details about the installation, see the readme.txt file on the CD-ROM disk.
Printing a Test Page
Printing a Test Page under Windows 3.x
Follow the procedure below in order to print a test page.
1. Turn the printer on. The
2. Insert a sheet in the printer and press the
3. Open a file from a basic application, such as Write for example.
4. Ensure that the Printer Driver is selected and that the settings match your paper size or
other specific parameters accompanying your file:
– Check that Paper Source option is set to Manual Feed.
– Check that Paper Size option matches the size of the sheet actually inserted.
5. Follow the instructions in your application documentation on printing a file.
1-22
indicator blinks.
Fault
FF/LOAD
button.