Configuring Inputs - Bosch VCU MS 50.4P Manual

11 | Analog and Frequency Inputs

11.2 Configuring inputs

11.2.1 Configuring a predefined Bosch sensor with the
54 / 136
'Bosch Sensor Wizard'
1. Click on 'Measurement Sources' in the Toolbox.
2. To expand the list of 'I/O Channels', click on '+' in the VCU MS 50.4P Project Tree.
3. Drag the "Bosch Sensor Wizard" from the Toolbox and drop it on the desired analog
input channel in the VCU MS 50.4P Project Tree.
The "Bosch Sensor Wizard" opens.
Vehicle_Control_Unit_VCU_MS_50.4P_Manual
Drag + Drop
Bosch Motorsport