Bosch VCU MS 50.4P Manual page 46

10 | CAN Configuration
10.2.4 Online view of CAN channels in vehicle
46 / 136
g) Check the box to automatically adjust the limits of the channel.
CAN analyzer functionality
This functionality is only available, if a MSA-Box (I or II) is used to connect the VCU MS
50.4P to the PC. Choose the CAN bus that is connected to the MSA-Box to display the raw
value and the converted physical value here.
Automatic creation of online measurement sheets
The CAN channel can be automatically inserted into a measurement sheet. Insert a name
for a new sheet or select an existing sheet from the list box.
For an online view of the value measured by the VCU MS 50.4P, insert the channel in an
online measurement sheet which is described in the chapter Setting up an online meas-
urement [} 73].
1. Double-click on 'Sheet 1' in Project Tree. Measurement Sheet 1 is displayed in Main
Area.
2. Click on 'Measurement elements' in the Toolbox.
3. Drag the desired Measurement element (e.g. Numeric Indicator) and drop it on the
Measurement Sheet.
Vehicle_Control_Unit_VCU_MS_50.4P_Manual Bosch Motorsport