Table of Contents
Advertisement
17 | Firmware
17.2.1 Performing the firmware update
118 / 136
Firmware update is only possible if the VCU MS 50.4P is connected to RaceCon. The con-
figuration of Input channels, CAN I/O, display, recording + telemetry will not be changed.
1.
In the VCU MS 50.4P Project Tree, right-click on 'VCU MS 50.4P' and choose 'Syn-
chronize' then 'Update firmware'. A pop-up menu opens.
2.
Select the destination of the firmware archive (PST). You can find the latest firmware
for the device at the Bosch Motorsport homepage.
3.
Click 'OK' when done. The firmware update starts. The VCU MS 50.4P displays the
message 'Updating firmware'. Do not switch off the car's ignition or interrupt the
power supply of the VCU MS 50.4P!
Vehicle_Control_Unit_VCU_MS_50.4P_Manual
Bosch Motorsport
Advertisement
Table of Contents
