Feature Activation - Bosch VCU MS 50.4P Manual

Bosch Motorsport

8.2 Feature activation

– Optional software feature packages are available for the VCU MS 50.4P
– All software feature packages can be purchased prior to delivery or after you have re-
ceived your device.
– If you have purchased an optional software feature package, it must be activated be-
fore it becomes operational.
– The feature activation status is stored permanently in the device and requires activat-
ing once only.
– As the activation key is device specific, a key delivered with one VCU MS 50.4P does
not work on any other VCU MS 50.4P.
– When purchasing a software feature package, you have to tell Bosch the ECU ID code.
The ECU ID code is device specific and can be found in the 'features info' window,
shown in the screenshots below.
– If you have not purchased an optional software feature package, the next steps can
be skipped.
1. Ensure a connection to the device.
2. To activate a feature, double-click on 'VCU MS 50.4P' in the Project Tree. There are
two upgrades available for the VCU MS 50.4P. One for the logger part and another
one for the ECU part. Depending on which upgrade (logger or ECU) you like to activ-
ate, double-click on either "VCU MS 50.4P - Logger" or "VCU MS 50.4P - ECU".
3. Click on the 'Features info' tab in the Main Area.
1st: Double-click
on DDU
2nd: Click on
'Features info'
The 'VCU MS 50.4P features info' window appears.
Vehicle_Control_Unit_VCU_MS_50.4P_Manual
Starting Up | 8
23 / 136