Bosch Motorsport
10. Click 'Apply changes' when done.
11. Connect the VCU MS 50.4P network cable.
12. Click on the 'Current Import' tab.
13. Click on 'Import' in the lower right corner.
If the 'Import all on connect' box is checked, the data transmission from the VCU MS
50.4P starts automatically. Measurement files are stored automatically in the folder
defined under 'Settings'.
14. Click on 'Close' when the transmission has finished.
15. Click on the Start button and choose 'Open measurement file'.
16. Select the measurement files from the storage folder.
17. Click on 'Open'.
18. Click on 'New Desktop' to open a new measurement data window.
19. Drag the 'ub' measurement channel from the channel list and drop it into the meas-
urement data window. The 'ub' measurement channel's graph is displayed.
Vehicle_Control_Unit_VCU_MS_50.4P_Manual
Starting Up | 8
Choose your Device / IP
from dropdown list
27 / 136