Table of Contents
Advertisement
Bosch Motorsport
A "Characteristic Curve Wizard" opens.
4.
To activate the internal pull up-resistor, check the box. The VCU MS 50.4P pull up-res-
istor is used to get a 5 V signal at the analogue channel of the VCU MS 50.4P. It al-
lows you, to use a push-button. The fixed value of the internal pull up-resistor is 3,010
Ohm. If using an additional external pull up-resistor, set up the overall resistance.
5.
Click 'Next' when done.
The second part of the "Sensitivity/Offset Wizard" opens.
Vehicle_Control_Unit_VCU_MS_50.4P_Manual
Drag + Drop
Analog and Frequency Inputs | 11
59 / 136
Advertisement
Table of Contents
