Lastgruppen (Load Groups); Control Types: Procont -Lmc; Analog Inputs; Schaltuhr (Timer) - janitza Procont-LMC User Manual And Technical Data

www.janitza.de
21.2.6

Lastgruppen (Load groups)

Lastgr.:( 1) [ Lastgr.:( 1) [ Lastgr.:( 1) [ ] 10 ] 10 ] 10
Lastgruppe 1 Lastgruppe 1
Art:LG Out: 0% Art:LG Out: 0%
SU:--- Man: ---(+) SU:--- Man: ---(+)
Art: LG (load group), Reg (control), VW (early
warning contact), Kon (capacitor)
Out: State display (0 - 100%)
SU: "---" Clock not active; "EIN (ON)" via
timer On; "AUS (OFF)" via timer Off
Man: "---" not active; "EIN (ON)" manual on;
"AUS (OFF)" manual off.
The states of the load groups can be set manually
with the "+" button.
21.2.7 Control types: Procont
RG001= 0/1 [ RG001= 0/1 [ RG001= 0/1 [ ] 12 ] 12 ] 12 ] 12 ] 12
Ix:0 MW=0.0 Ix:0 MW=0.0
Regl:0 Dyn:0 Out: Regl:0 Dyn:0 Out: 0 0
Zt: Zt: 5, 5, 0, 0, 0 0
RG001 Control using No. 1
0/1
Ix:0
IO1=0/MW:0.0 Instantaneous value (MW) of the source
Regl:0 0 = "Wenn: aus (If: off)",
1= "Wenn: ein (If: on)"
Dyn:0
Out:0 Limit value
Zt: 5,0,0 Times: Response time(s),Reset
delay(s), Minimum run time(s)
21.2.8
Analog:AI-1 [ Analog:AI-1 [ Analog:AI-1 [
Analog input 1 Analog input 1
Art: passiv ADC:1023 Art: passiv ADC:1023
MoW: 24.1 °C MoW: 24.1 °C
Measured values to analog inputs
Analog input 1 = Designation
Type: passive, active
ADC: 1023
MoW: Instantaneous value
21.2.9
SU- 1 [ SU- 1 [ SU- 1 [
Zustand: deaktiv Zustand: deaktiv
State display of the respective timer
-LMC
®
Procont -LMC | Procont
®

Analog inputs

] 13 ] 13 ] 13

Schaltuhr (Timer)

] ] ] 14 14 14
TE
-LMC-LI
®
51