Function Modules - janitza Procont-LMC User Manual And Technical Data

www.janitza.de TE
Procont -LMC | Procont -LMC-LI
® ®
10.4

Function modules

Various function modules are available that can be
linked with an output in series or in parallel. There
are 4 modules available per output, which can be
linked either all in series or 2 each in parallel.
In the default setting, the most important modules
are already linked to the outputs.
2 modules each in series:
All 4 modules in series:
Switch between the function modules using the
arrow buttons and , and insert a module using
the +/- buttons.
To switch between the two variants, change the
link marked in the red area.
Example 1: Load group 1 with timer function 001:
The output is enabled either by load group 001 or
by timer 001.
27