Eco Controller - janitza Procont-LMC User Manual And Technical Data

www.janitza.de
9. Eco-Regler (Eco controller)
The eco controller ensures that excess energy is
not fed into the power grid.
The connected load for the photovoltaic system
can be found in the "Eco controller" submenu.
V
Pressing the button takes you to the fi rst out-
put. The button is used to navigate to the pow-
er, which can be adjusted using the "+/-" buttons.
Confi rm with OK.
10:00:00 MI 10.05.2022 10:00:00 MI 10.05.2022
HZ: 0.00 kW HZ: 0.00 kW 10.0m 10.0m
HT/Wint. HT/Wint. Abg.LG: 0 Abg.LG: 0
Example: At I/O5, an electric heater with a power
of 2 kW is controlled by an electronic contactor.
Parameters
Eco-Regler

(Eco controller)

Nullpunkt (Zero point)
Toleranz (Tolerance)
EC01, EC02,...
Art (Type)
Ref (Designation)
Lstg (Power)
Eingabeauswahl:* Eingabeauswahl:*
Eco-Regler Eco-Regler
* Ein/Ausgänge * Ein/Ausgänge
Eco-Regler:Automatik Eco-Regler:Automatik
Nullpunkt: Nullpunkt: -0.1 kW -0.1 kW
Toleranz: Toleranz: 0.05 kW 0.05 kW
Setting
deaktiv (deactivated)
Automatik (Automatic)
Stufen (Levels)
-0.10 kW
0.05 kW
Analog, digital
Eco controller designation,
output power
Procont -LMC | Procont
®
EC-01: Art: Analog EC-01: Art: Analog
Bez:Eco->IO/5 Bez:Eco->IO/5
Lstg: 2.00 kW Lstg: 2.00 kW
Function
Function not active
Groups are automatically
switched depending on the
power; the group that matches
the power specifi ed is always
switched
Groups are switched from level 1
to level 8
A zero point that is used as a
reference for control can be
specifi ed here
Tolerance from zero point
Display of the confi gured output
controllers
TE
-LMC-LI
®
23