Electrically Qualified Personnel; Warranty In The Event Of Damage - janitza Procont-LMC User Manual And Technical Data

Procont -LMC | Procont
®
2.5

Electrically qualified personnel

To avoid bodily injury and material damage, only
electrically qualified personnel are permitted to
work on the devices and their components, mod-
ules, assemblies, systems and current circuits who
have knowledge of:
· The national and international accident preven-
tion regulations.
· Safety technology standards.
· Installation, commissioning, operation, discon-
nection, grounding and marking of electrical
equipment.
· The requirements concerning personal protective
equipment.
Electrically qualified persons within the scope
of the technical safety information of all usage
information associated with the device and its
components are persons who can furnish proof of
qualification as an electrically skilled person.
Warning against unauthorized manipulation or
improper use of the device or its components!
Opening, dismantling or unauthorized manipula-
tion of the device and its components which goes
beyond the mechanical, electrical or other operat-
ing limits indicated can lead to material damage or
injury, up to and including death.
· Only electrically qualified personnel are permit-
ted to work on the devices and their compo-
nents, assemblies, systems and current circuits.
· Always use your device or component only in
the manner described in the associated docu-
mentation.
· If there is discernible damage, send the device
or the component back to the manufacturer!
12
-LMC-LITE
®
WARNING
2.6

Warranty in the event of damage

Any unauthorized tampering with or use of the
device constitutes "misuse" and/or "negligence"
under the product's warranty and thus voids the
warranty for any possible resulting damage. In
this regard, note chapter „3.3 Intended use" on
page 14.
www.janitza.de