Table of Contents
Advertisement
Procont
-LMC | Procont
®
3.
Product description
3.1
Device description
The device is the central system for a load control
and energy management system that can spe-
cifically influence consumption and thus avoid
expensive load peaks.
A 9-key keypad is used for operation.
3.2
Incoming goods inspection
Safe and trouble-free operation of this device and
its components presupposes proper transport,
proper storage, set-up and assembly as well as
operation and maintenance in addition to com-
pliance with the safety information and warning
notices.
Exercise due caution when unpacking and packing
the device, do not use force and only use suitable
tools.
Before installing the device, please check the
following:
· Its flawless mechanical condition by visual in-
spection.
· The scope of delivery for completeness.
If it can be assumed that safe operation of the
device is no longer possible:
· Disconnect the device from operation immediate-
ly!
· Secure the device against being switched on
again!
It can be assumed that safe operation is no longer
possible if the device, for example:
· Has visible damage.
· No longer functions despite an intact power
supply.
· Was subjected to extended periods of unfavor-
able conditions (e.g. storage outside of the per-
missible climate thresholds without adjustment to
the room climate, condensation, etc.) or transport
stress (e.g. falling from an elevated position, even
without visible external damage, etc.).
14
-LMC-LITE
®
3.3
Intended use
The device is:
· Only for use in the industrial sector.
· Intended for installation in switchboard cabinets
and small distribution boards.
· Intended for mounting on a DIN rail.
· Not intended for installation in vehicles! Use of
the device in non-stationary equipment consti-
tutes an exceptional environmental condition and
is only permissible by special agreement.
· Not intended for installation in environments with
harmful oils, acids, gases, vapors, dusts, radia-
tion, etc.
· Designed as an interior meter.
Safe and trouble-free operation of the device
requires proper transport, storage, assembly,
installation, operation and maintenance.
3.4
EU conformity declaration
Please see the EU declaration of conformity post-
ed at www.janitza.de for the laws, standards and
directives applied by Janitza electronics GmbH for
the devices. The CE conformity marking require-
ments for the device arise from the EU conformity
declaration and the laws, standards and directives
mentioned therein.
3.5
Scope of delivery
Quantity Part. no.
Designation
60 00 300
Procont
1
60 00 301
Procont
1
33 03 389
Installation manual
www.janitza.de
-LMC
®
-LMC-LITE
®
Advertisement
Table of Contents
