Tariff Switching; Niedertarif (Low Tariff); Sommertarif (Summer Tariff); Spezialtarif (Special Tariff) - janitza Procont-LMC User Manual And Technical Data

www.janitza.de
Example: Blocking time = 5 min, i.e. no new
period can start in the fi rst 5 minutes of the period.
This limits the number of false pulses.
Blocking time
Period duration = 15 min
0................. .5........... .......10.........
HTx When the high tariff is active,
synchronization is external
NTi When the low tariff is active,
synchronization is internal
ext+int If the synchronizing pulse does not come
from an external source,
it synchronizes according to the
internal time
If the external synchronous pulse is not connected,
the current system time is applied in a 15 min time
grid. The synchronization takes place via a time
server or the Procont -VIS.
®
20.2

Tariff switching

Tariffs:
Hochtarif High tariff only,
Hoch-& Niedt. High and low tariff
Somm. und Wint. Summer and winter tariff
HT,NT, So+Wint. High tariff, Low tariff,
Summer and Winter tariff
Verzögerung: 0 s Delay of tariff switching in s
20.3

Niedertarif (Low tariff)

Active low tariff
Niedertarif Niedertarif
Aktivierung: IO-004 Aktivierung: IO-004
Unterstation: Lk Unterstation: Lk
wenn: 0 wenn: 0
Aktivierung (Activation):
.........15 min
Mst, IO, SU-
Unterstation (Substation):
Lk, 01, 02
if: 0/1
20.4

Sommertarif (Summer tariff)

See low tariff
20.5

Spezialtarif (Special tariff)

The special tariff can only be set for the
Procont
It can be used as an additional tariff along with the
standard tariffs. Setting options: see low tariff.
Procont -LMC | Procont
®
Master, input, SU = timer
001, 002, ... Number from
input/timer
Substation number whose
input is used for the low tariff;
Lk = Local controller
IO: A specifi cation must be made
as to whether the tariff should be
active with 0 or 1.
-LMC.
®
TE
-LMC-LI
®
47