Load Groups - janitza Procont-LMC User Manual And Technical Data

www.janitza.de
13. Lastgruppen (Load groups)
10:00:00 MI 10.05.2022 10:00:00 MI 10.05.2022
HZ: 0.00 kW HZ: 0.00 kW 10.0m 10.0m
HT/Wint. HT/Wint. Abg.LG: 0 Abg.LG: 0
LG-No. 1 fi rst load group, preset to I/O 5
As many consumers can be set as have been
defi ned in the system settings. If the same priority
is assigned to 2 or more loads, they are equal and
the order of disconnection is changed with each
disconnection cycle according to a fi xed schema.
LG-No. 2 second load group, preset to I/O 6
Use the " V " and " " buttons to go to the next/
previous load group.
Name Default
Funktion Lastgruppe
(Function) (Load group)
Reg-Art Normal
(Ctrl type)
Lstg (power) 5.0 kW
SU (Timer) -----
Use buttons and to select the individual set-
tings and change them as needed.
To change a value, use the + or - buttons.
Pressing the buttons again opens the advanced
settings (depending on which controller type (Reg-
Art) you have selected).
Eingabeauswahl: Eingabeauswahl:
* Ein/Ausgänge * Ein/Ausgänge
* Ethernet-Adapter * Ethernet-Adapter
* Lastgruppen * Lastgruppen
LG-Nr.:1 LG-Nr.:1
Funktion: Lastgruppe Funktion: Lastgruppe
Reg-Art: normal Reg-Art: normal
Lstg: 5.0 kW SU:---- Lstg: 5.0 kW SU:----
Setting
Lastgruppe (Load group), Vorwar-
nung (Early warning), Gas-LG (gas
LG), deaktiv (deactivated)
normal, Regler (Controller)
5.0 kW
-----, 1, 2, 3, ..., 128
Procont -LMC | Procont
®
LG-Nr.:1 LG-Nr.:1
Par-1: Prio: 1 Par-1: Prio: 1
EE: 0.0 m ZA: 0.0 m EE: 0.0 m ZA: 0.0 m
EA: 0.0 m TgA: 0 m EA: 0.0 m TgA: 0 m
Description
Function of this load group
Selection of normal load group, early warning
contact, gas load group or deactivated
Controller type
Selection of normal load group or controller
Connected load of the load group in kW
Selection of timer for this load group only
TE
-LMC-LI
®
31