6.2.6.
System Control Instructions
Click the Control button on the menu interface, enter the initial control password "1111" and click
"OK". When the password is verified, click "Next" to enter the Control interface, as shown in
Figure 6-8
Table 6-4: Structure of Control menu
Menu
System
UPS
UPM
Copyright © 2022 Santak Corporation plc. All rights reserved.
Figure 6-7: Battery interface
. The structure of Control menu is shown in
Option description
On the "System" screen, you can perform system-to-bypass switching, system
startup, system shutdown, and ECO enabling operations. In the upper part of the
interface, you can view the UPS status and battery status.
On the "UPS" screen, you can perform battery test, turn on the battery charger, turn
off the battery charger, turn on a single UPS, or turn off a single UPS. In the upper
part of the interface, you can view the UPS status and battery status.
On "UPM" screen, you can view UPM status, UPS status, and battery status; or shut
down the UPM.
Figure 6-8: Password verification interface
Santak 3C3 HD 20-80 kW UPS
Installation and Operation Manual
Figure 6-4
.
52