Safety Instructions - Santak C1KR(S) User Manual

2. S I
AFETY NSTRUCTIONS
PLEASE READ THIS USER MANUAL AND THE SAFETY INSTRUCTIONS BE-
FORE INSTALLING THE UNIT AND STARTING IT UP!
Transport
Please transport the UPS system only in the original packaging (to protect against
●
shock and impact).
Set-up
Condensation may occur if the UPS system is moved directly from a cold to a
●
warm environment. The UPS system must be absolutely dry before being installed.
Please allow an acclimatization time of at least two hours.
Do not install the UPS system near water or in damp environment.
●
Do not install the UPS system where it would be exposed to direct sunlight or near
●
heat.
Do not block air vents in the front, in the back or on the sides of the UPS.
●
Installation
Do not connect appliances or items of equipment which would overload the UPS
●
system (e.g. laser printers) to the UPS outlet socket.
Place cables in such a way that no one can step on or trip over them.
●
Do not connect household appliances such as hair dryers to the UPS output
●
sockets.
The UPS can be operated by any individuals with no previous training.
●
Following for 1K(S)/2K(S)/3K(S) only
Connect the UPS system only to an earthed shockproof socket outlet.
●
The utility power socket-outlet (shockproof socket-outlet) must be easily
●
accessible and close to the UPS system.
During the installation of this equipment it should be assured that the sum of the
●
leakage current of the UPS and the connected loads does not exceed 3.5mA.
Following for 6K only
Warning - This is a product for designated sales distribution to authorized partners.
●
Installation or additional measures should be carried out by qualitied personal to
prevent disturbances.
A readily accessible disconnection device shall be incorporated in the building
●
installation wiring and the disconnection device must be easily accessible and
close to the UPS system.
Only qualified maintenance personnel may carry out installations.
●
2