Safety Instructions - Santak CASTLE Series User Manual

1.3 Safety Instructions

Safety Rules
Read the safety rules in this manual, which must be strictly observed
during the installation, use and maintenance of the UPS
Note :
• UPS has high pressure inside.
• UPS can supply power by battery, and output may have high voltage even if
the input power line is not connected
Battery voltage and external battery box for each model：
Model
Rack1KS
Rack2KS
Rack3KS
• Protective earth wire installation - Yellow/green wire is required, The wire
diameter is not less than the following table requirements.
Rack2K(S)/ Rack3K(S)
• Do not make the battery very short or reverse.
• Please put UPS City electrical outlet in the vicinity of UPS so as to unplug the
mains and plug the power supply in emergency case.
Dangerous Voltage
• Before touching the battery, make sure that there is no high voltage between
the battery terminals and the protective ground.
• Avoid electric shocks. The connection of the battery and the machine should
be broken before repairing the machine.
Battery Battery box
weight（ kg ）
voltage
36V 20.0
72V 20.0
96V 24.8
Type
Rack1K(S)
Battery box size
W× L × H（ mm ）
Battery module
Wire Diameter（≥）
- 9 -
。
438*420*87
438*420*87
438*420*87
18AWG
16AWG