Control Panel - Santak CASTLE On-Line Series User Manual

The display panel lays on the front panel of UPS, consists 2 pieces
control button, 4 pieces LED indicate light and LCD panel, which is shown
as below:
1.
ON/OFF Button: Turn on/off UPS.
2.
Test/Function button:
Alarm Silence mode( bypass mode and battery mode, press
Test/Function button not less than 2s and not more than 10s, it will clean all
the bypass mode and battery mode fault alarm; if press Test function button
more than 10s, it will clean all mode fault alarm. Repeat above operation will
end the silence mode.);
Battery self-test model(Line mode, press Test/Function button not less than
2s and not more than 10s, UPS will enter Battery self-test mode).
3.
LED Indicator:
Consists online mode indication(ONLINE), battery statue
indication(BAT), bypass indication(BYPASS), fault indication(FAULT).
Indicator Behavior
Online Light
Off
Battery Light
Blink per second
Bypass Light
Blink per second
Fault Light

3. Control Panel

Description
UPS operates normally, power module supply
power for load.
Load powered by bypass (Not ECO-mode), or
UPS no output.
Battery supply power for load, Online LED also
lighted.
Charger or battery being abnormally.
UPS works in ECO-mode (Online LED also
lighted), or load powered by bypass.
Bypass being abnormally.
UPS in fault-mode, UPS will keep powering for
load when no EPO signal or short-circuit fault.
- 19 -