Table of Contents
Advertisement
g [1920x1080p], [1920x1080i]
10) Press the <执行> button.
f The confirmation screen is displayed.
11) Press qw to select [OK], and press the <执行> button.
Note
f The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].
f Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.
f The computer, video device, or projector in use may require the power to be turned off and on again after setting.
f The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
[DIGITAL LINK 输入]
Set this item in accordance with the video signal input to the <DIGITAL LINK> terminal.
Setting [SIGNAL LEVEL] in [DIGITAL LINK 输入]
1)
Press as to select [DIGITAL LINK 输入].
2)
Press the <执行> button.
f The [DIGITAL LINK 输入] screen is displayed.
3)
Press as to select [SIGNAL LEVEL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The signal level is displayed for 30 bits of input.
Setting [EDID SELECT] in [DIGITAL LINK 输入]
1)
Press as to select [DIGITAL LINK 输入].
2)
Press the <执行> button.
f The [DIGITAL LINK 输入] screen is displayed.
3)
Press as to select [EDID SELECT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[4K/60p]
[4K/30p]
[2K]
Note
f Switch the setting to [4K/30p] when proper image is not projected while [EDID SELECT] is set to [4K/60p] and the 4K video signal is input.
f Switch the setting to [2K] when proper image is not projected while [EDID SELECT] is set to [4K/60p] or [4K/30p] and the 2K video signal or
lower is input.
f For details of the signal described in EDID of [4K/60p], [4K/30p], or [2K], refer to "List of plug and play compatible signals" (x page 224).
108 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-
ray disc player) is input to the <DIGITAL LINK> terminal via a twisted-pair-cable transmitter.
Select this item when the signal output from the DVI-D terminal or HDMI terminal of an external
device (such as a computer) is input to the <DIGITAL LINK> terminal via a twisted-pair-cable
transmitter.
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 60 Hz).
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 30 Hz).
Switches to EDID corresponding to the 2K video signal (maximum 1 920 x 1 200 dots) or lower.
Advertisement
Table of Contents
