Executing The Lens Calibration - Panasonic PT-SMZ16KCL Operating Instructions (Functional Manual)

Executing the lens calibration

When the projector is used for the first time or when the projection lens is replaced, execute the lens calibration.
Detect the lens adjustment limit value, and perform the calibration in the adjustment range.
1) Press the <菜单> button.
f The [MAIN MENU] screen is displayed.
2) Press as to select [PROJECTOR SETUP].
3) Press the <执行> button.
f The [PROJECTOR SETUP] screen is displayed.
4) Press as to select [LENS].
5) Press the <执行> button.
f The [LENS] screen is displayed.
6) Press as to select [LENS CALIBRATION].
7) Press the <执行> button.
f The confirmation screen is displayed.
8) Press qw to select [OK], and press the <执行> button.
f The lens calibration is started.
f After completing the calibration, the projection lens will move to the home position.
Note
f If the projection lens was replaced, execute the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION].
f [PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during calibration.
f [INCOMPLETE] is displayed when the lens calibration is not performed correctly.
f The origin position of the lens mounter and the home position of the projection lens are automatically updated when the lens calibration is
performed.
The home position is an origin position of the lens shift (vertical position and horizontal position of the lens) based on the calibration result. It
does not match with the optical image center position.
f [---] is displayed in the confirmation screen for executing the lens calibration if the automatic acquisition of the projection lens information
fails. The calibration of the focus position and zoom position will not be performed when the lens calibration is executed in this condition.
f Turn off the projector and reattach the projection lens when [---] is displayed in the confirmation screen for executing the lens calibration.
After reattaching the projection lens, confirm that the type of the projection lens attached to the projector is displayed in the [PROJECTOR
SETUP] menu → [LENS] → [LENS TYPE].
f The home position varies depending on the projection lens type. For details, refer to "Lens shift range" (x page 67).
f If the lens calibration is executed while the [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [ACTIVE FOCUS]
is set to [ON], the operation of the temperature detection correction of the active focus optimizer function will stop.
f Pressing the <聚焦> button on the remote control for at least three seconds will also display the confirmation screen for lens calibration
execution.
Chapter 3 Basic Operations — Projecting
ENGLISH - 65