Table of Contents
Advertisement
[IP ADDRESS]
6)
Press qw to switch the setting.
f The items will switch each time you press the button.
[ON]
[OFF]
f Repeat Steps 5) to 6) until the desired display items are set.
Note
f This can also be set with operation in the information monitor. For details, refer to "Using the information monitor function" (x page 180).
Setting the direction to display
Set the direction of the text to display in the information monitor.
1)
Press as to select [INFO MONITOR SETTING].
2)
Press the <执行> button.
f The [INFO MONITOR SETTING] screen is displayed.
3)
Press as to select [DIRECTION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[NORMAL]
[FLIPPED]
Note
f This can also be set with operation in the information monitor. For details, refer to "Using the information monitor function" (x page 180).
Setting the brightness of the information monitor
Set the brightness of the information monitor.
1)
Press as to select [INFO MONITOR SETTING].
2)
Press the <执行> button.
f The [INFO MONITOR SETTING] screen is displayed.
3)
Press as to select [BRIGHTNESS].
4)
Press qw to adjust the level.
Operation
Press w.
Press q.
Note
f [BRIGHTNESS] is adjusted in increments of 10.
f This can also be set with operation in the information monitor. For details, refer to "Using the information monitor function" (x page 180).
[DATA CLONING]
Perform the operations of the data cloning function. Data such as the settings and adjustment values of the
projector can be copied to multiple projectors via LAN.
For details of operation, refer to "Using the data cloning function" (x page 188).
142 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
IP address of the wired LAN
Displays the items in the information monitor.
Does not display the items in the information monitor.
Detects the orientation of the projector by the built-in angle sensor, and automatically sets the
direction of the text displayed in the information monitor. Set [AUTO] normally.
Select this item when installing the projector on a desk, etc.
Select this item when installing the projector with the top surface of the projector facing down such as
ceiling attachment.
Displays the text inverted upside down from when [NORMAL] is set.
The information monitor becomes bright.
The information monitor becomes dark.
Adjustment
Range of adjustment
30 % - 100 %
(Factory default setting: 100 %)
Advertisement
Table of Contents
