Table of Contents
Advertisement
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[9600]
[19200]
[38400]
7)
Press as to select [(IN) PARITY].
8)
Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
Setting the communication condition of the <串口/多台投影机同步输出> terminal
1)
Press as to select [RS-232C].
2)
Press the <执行> button.
f The [RS-232C] screen is displayed.
3)
Press as to select [(OUT) BAUDRATE].
4)
Press qw to switch the item.
[9600]
[19200]
[38400]
5)
Press as to select [(OUT) PARITY].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
Setting the response
1)
Press as to select [RS-232C].
2)
Press the <执行> button.
f The [RS-232C] screen is displayed.
3)
Press as to select [RESPONSE(ID ALL)].
4)
Press qw to switch the item.
[ON]
[OFF]
5)
Press as to select [GROUP].
6)
Press qw to switch the item.
[A] - [Z]
7)
Press as to select [RESPONSE(ID GROUP)].
Chapter 4 Settings — [PROJECTOR SETUP] menu
Select the proper speed.
Select the parity condition.
Select the proper speed.
Select the parity condition.
Returns the response when an ID is designated as ALL.
Does not return the response when an ID is designated as ALL.
Controls multiple projectors simultaneously by sending the ID of RS-232C. You can set groups from
[A] to [Z]. The projector responds when the ID of RS-232C matches the setting.
ENGLISH - 137
Advertisement
Table of Contents
