Table of Contents
Advertisement
Confirmation of operation for the devices of other manufacturers has been performed with the items set
independently by Panasonic Connect Co., Ltd., and not all the operations are warranted. For operation or
performance problems caused by the devices of other manufacturers, contact the respective manufacturers.
DIGITAL LINK
"DIGITAL LINK" is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted
pair cable by adding unique functions by Panasonic Connect Co., Ltd. to the HDBaseT
formulated by HDBaseT Alliance.
By installing the optional DIGITAL LINK Terminal Board (Model No.: TY-SB01DL) in the slot on the projector,
connection with the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) or
the peripheral devices by other manufacturers based on the HDBaseT
such as the "XTP transmitter" of Extron Electronics) becomes possible. For the devices of other manufacturers
that the operation has been verified with this projector, visit the following website.
https://panasonic.net/cns/projector/
Confirmation of operation for the devices of other manufacturers has been performed with the items set
independently by Panasonic Connect Co., Ltd., and not all the operations are warranted. For operation or
performance problems caused by the devices of other manufacturers, contact the respective manufacturers. The
projector is not equipped with an audio function so it is not possible to output audio.
Art-Net
"Art-Net" is an Ethernet communication protocol based on the TCP/IP protocol.
By using the DMX controller and the application software, illumination and stage system can be controlled. Art-Net
is made based on DMX512 communication protocol.
Application software supported by the projector
The projector supports following application software.
For details or downloading application software except for "Geometric & Setup Management Software" and
"Projector Network Setup Software", visit the following website.
https://panasonic.net/cns/projector/
"Geometric & Setup Management Software" and "Projector Network Setup Software" can be downloaded from the
following website ("Panasonic Professional Display and Projector Technical Support Website").
https://panasonic.net/cns/projector/pass/
It is necessary to register and login to PASS
Technical Support Website".
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
f Logo Transfer Software
This application software transfers the original image, such as company logo, which is projected at the start, to
the projector.
f Smart Projector Control
This application software sets and adjusts the projector connected to the network using a smartphone or a
tablet.
f Multi Monitoring & Control Software
This application software monitors and controls the multiple display devices (projector and flat panel display)
connected to an intranet.
f Early Warning Software
This plug-in software monitors the status of the display devices and their peripherals within an intranet, and
notifies of abnormality of such equipment and detects the signs of possible abnormality. "Early Warning
Software" is pre-installed in the "Multi Monitoring & Control Software". To use the early warning function of
this plug-in software, install "Multi Monitoring & Control Software" in the PC to be used. By enabling the early
warning function, it will notify of the approximate time to replace the consumables for the display devices,
to clean each part of the display devices, and to replace the components of the display devices, allowing to
execute maintenance in advance.
The early warning function can be used by registering maximum of 2048 display devices free of charge for
90 days after installing the "Multi Monitoring & Control Software" into a PC. To continuously use after the 90
days, it is necessary to purchase the license of "Early Warning Software" (ET-SWA100 Series) and perform
the activation. Also, depending on the type of license, the number of display devices that can be registered for
monitoring varies. For details, refer to the Operating Instructions of "Multi Monitoring & Control Software".
Chapter 1 Preparation — Precautions for use
to download from "Panasonic Professional Display and Projector
*1
communication standard
TM
standard (twisted-pair-cable transmitters
TM
ENGLISH - 29
Advertisement
Table of Contents
