Functionality Testing - AJAX KeyPad TouchScreen User Manual

KeyPad TouchScreen User manual | Ajax Systems Support
If battery of any device is
low.
Sound notiDcations of malfunctions appear when the keypad
indication is Dnished. If several malfunctions occur in the system,
the keypad will notify about the loss of connection between the
device and the hub Drst.

Functionality testing

The Ajax system offers several types of tests to help select the
correct installation place for the devices. Tests do not start
immediately. However, the waiting time does not exceed the
duration of one "hub—device" polling interval. Polling interval can be
checked and conDgured at hub settings (Hub → Settings
Jeweller or Jeweller/Fibra).
To run a test, in the Ajax app:
1. Select the required hub.
2. Go to the Devices
3. Select KeyPad TouchScreen from the list.
4. Go to Settings
https://support.ajax.systems/en/manuals/keypad-touchscreen/
Three short sound
signals, LED indicator
blinks three times.
Beep once per minute
until the battery is
restored or the device is
removed.
tab.
.
Users can delay sound
indication for 4 hours.
→
14.08.2023, 17:03
Page 73 of 83