Functionality Testing - AJAX KeyPad Combi User Manual

Touch button pressed
The system is armed
The system is disarmed
An incorrect password was entered or there was
an attempt to change security mode by an
unverified or deactivated card or key fob
The security mode cannot be activated (for
example, a window is open and the System
integrity check is enabled)
The device keypad is locked due to a wrong
password attempt or unauthorised card or key
fob usage
The batteries are low

Functionality testing

The Ajax security system provides several types of tests that help you make sure
that installation points of devices are selected correctly.
KeyPad Combi functionality tests start instantly, irrespective of the hub-detector
ping period (36 seconds with the standard settings of the hub).
The tests are available in the device settings menu (Ajax App
KeyPad Combi Settings
Jeweller Signal Strength Test
Short beep, the current security status LED blinks
once
Short beep, Armed or Night mode LED lights up
Two short beeps, the Disarmed LED lights up
Long beep, the current security status LED blinks
3 times
Long beep, the current security status LED blinks
3 times
Long beep, during which all keypad LEDs blink 3
times
After changing the security mode, LED
(Malfunction) lights up. The touch buttons are
locked for this time.
When you try to turn on KeyPad Combi with
discharged batteries, it emits a long beep, LED
smoothly lights up and goes off, then the keypad
turns off
How to replace batteries in KeyPad
Combi
):
X
X
Devices