AJAX KeyPad TouchScreen User Manual page 50

KeyPad TouchScreen User manual | Ajax Systems Support
1. Open the Ajax app.
2. Select the hub to which you want to add a Tag or Pass.
3. Go to the Devices
4. Click Add Device.
5. Select Add Pass/Tag.
6. Specify the type (Tag or Pass), colour, device name, and user (if
necessary).
7. Click Next. After that, the hub will switch to the device
registration mode.
8. Go to any compatible keypad with Pass/Tag Reading enabled,
activate it.
https://support.ajax.systems/en/manuals/keypad-touchscreen/
tab.
Make sure the Pass/Tag Reading feature is enabled in at least one
keypad settings.
14.08.2023, 17:03
Page 50 of 83