AJAX KeyPad TouchScreen User Manual page 45

KeyPad TouchScreen User manual | Ajax Systems Support
1. Open the Ajax app.
2. Go to the Devices
3. Select the hub and go to its Settings
4. Select the Service menu.
5. Go to the section Sounds and Alerts.
6. Enable the If in-app panic button is pressed toggle.
7. Click Back to save the new settings.
Setting the keypad after-alarm indication
The keypad can inform about triggering in the armed system by
means of LED indication.
The option functions as follows:
1. The system registers the alarm.
2. The keypad plays an alarm signal (if enabled). The duration and
volume of the signal depend on the
3. The keypad LED nashes twice (once every 3 seconds) until the
system is disarmed.
https://support.ajax.systems/en/manuals/keypad-touchscreen/
tab.
device settings
.
.
14.08.2023, 17:03
Page 45 of 83