Adding To The System - AJAX KeyPad TouchScreen User Manual

KeyPad TouchScreen User manual | Ajax Systems Support

Adding to the system

To connect KeyPad TouchScreen to the hub, the keypad must be
located at the same secured facility as the system (within the range
of the hub radio network). For the keypad to work via the
signal range extender, you must Drst add the keypad to the hub, then
connect it to ReX 2 in the settings of the range extender.
Before adding a device
1. Install an
2. Create a
compatible hub to the app, make the necessary settings, and
create at least one
https://support.ajax.systems/en/manuals/keypad-touchscreen/
The ID and the number of the device can be found in its
app .
KeyPad TouchScreen is incompatible with Hub, Hub Plus and third-party
security control panels.
The hub and the device operating at different radio frequencies are
incompatible. The radio-frequency range of the device may vary by
region. We recommend purchasing and using Ajax devices in the same
region. You can check the range of operating radio frequencies with the
technical support service
Ajax app .
user or PRO account if you don't have one. Add a
virtual room
.
.
14.08.2023, 17:03
states in the Ajax
ReX 2 radio
Page 15 of 83