Bluetooth Setting - AJAX KeyPad TouchScreen User Manual

KeyPad TouchScreen User manual | Ajax Systems Support
After activation, KeyPad TouchScreen will display a screen for
switching the keypad to the access devices resetting mode.
Click the Start button.
The screen for switching the keypad to the resetting mode will
appear on all KeyPad TouchScreen of the system. When an
admin or PRO with rights to conDgure the system starts
resetting Tag/Pass at one keypad, the rest will switch to the
initial state.
9. Put Pass or Tag with the wide side to the keypad reader for a
few seconds. It is marked with wave
successful formatting, you will receive a notiDcation in the Ajax
app and on the keypad display. If the formatting fails, try again.
10. If you need to reset another Tag or Pass, click Reset another
Pass/Tag in the app. Repeat step 9.

Bluetooth Setting

KeyPad TouchScreen supports security modes control by bringing a
smartphone to the sensor. Security management is established
through a Bluetooth communication channel. This method is
convenient, secure, and fast, as there is no need to enter a
password, add a phone to the keypad, or use Tag or Pass that could
be lost.
https://support.ajax.systems/en/manuals/keypad-touchscreen/
A screen updates automatically if external power supply is
connected and the Always Active Display toggle is enabled in the
keypad settings.
icons on the body. Upon
14.08.2023, 17:03
Page 53 of 83