Table of Contents
Advertisement
Chapter 1 FCOMP/-PRO Principles
General introduction
General introduction
FiberCompletePRO™ is the first solution to fully automate all the fundamental fiber-qual-
ification tests, such as bidirectional insertion loss (IL), optical return loss (ORL) and
optical time domain reflectometry (OTDR), with one module from one optical port. For
high fiber count projects, it is now possible to automatically test up to 12 ribbon fibers
with the Multi-fiber MPO optical switch module.
Select the best module and software configuration upon the fiber qualification tests
needed:
•
Bi-Directional insertion loss (IL) and ORL with Fault Finder:
–
–
•
Bi-Directional insertion loss (IL), ORL and OTDR (unidirectional and/or bi-
directional):
–
–
•
On-board true bi-directional OTDR event analysis
–
• available with E41xx-A, E41xx-B, E41xx-C, E41xx-B FCOMP modules
–
• available with Smart OTDR A & B, E41xx-A, E41xx-B, E41xx-C, E41xx-B
•
High Fiber Count
–
2
available with E41xx-FCOMPFF and E41xx-B-FCOMP modules
available with E41xx-B modules implemented with E41OTDRPM optical
power meter option and EOTDR-TO-FCOMP-UPG software option.
available with E41xx-B FCOMP modules
available with E41xx-B modules implemented with E41OTDRPM optical
power meter option and EOTDR-TO-FCOMP-UPG software option.
TrueBIDIR Method (two units at each end of the link)
with ETRUEBIDIR-FCOMP-PRO software option
Loopback Method (a single unit at one end and a loop cable at the other
end)
FCOMP modules with ELOOPBACK-FCOMP-PRO software option
available with an additional module: E41MPO12SM multi-fiber MPO switch
module.
User Manual
700MAN203 Rev. 007
Advertisement
Table of Contents
