High Fiber Count - Viavi FCOMP/-PRO T-BERD/MTS-2000V2 User Manual

High Fiber Count

Chapter 7
(FCOMP...+ MPO switch + Cable-SLM)
This chapter describes the use of the MPO module switch (designed to handle high fiber
count applications) with Cable-SLM software (automatically activated with the installa-
tion of the switch).
Cable-SLM will allow to create a test project for every cable to be tested as well as track
project progress in real time and save project test data and generate reports right away.
The option activates a new softkey/button Manage Project at the bottom right of the
Process page.
The topics discussed in this chapter are as follows:
• "Establishing references for Loss and ORL measurements" page 80
• "Configuring the MPO Module" page 81
• "Creating a project for an automatic switch sequence" page 83
• "Customizing a test sequence" page 85
• "Launching the project test process" page 87
• "Results display" page 88
• "Files and project storage" page 90
• "Manual saving and report generation" page 92
User Manual 700MAN203 Rev. 007
7
79