Table of Contents
Advertisement
Chapter 3 Loss test (bi-directional IL/ORL + Fault Finder)
Results screen
Figure 26
Test in progress
d
Results screen
Once the tests are completed, the IL/ORL results are displayed and stored on the local
unit.
Cable view
If, in Setup > Analysis, the parameter Table View is set to Cable, the Cable tab
contains below results:
34
Once all tests are performed, results are displayed on both units
If Fault Finder parameter is set to Yes and an IL or ORL value reaches one
of the user defined thresholds, the Fault Finder starts.
User Manual
700MAN203 Rev. 007
Advertisement
Table of Contents
